HROUS

Tree Root Mapping for Toronto Owners: Drawing Requirements

Advertisement

Before relying on tree root mapping, separate Toronto’s Tree Protection Plan and permit requirements from the additional investigation records to commission: coverage, marked findings, depth references, survey ties and blind spots.[1][2][3][4]

Close-up of a moss-covered tree trunk in a vibrant green forest, showcasing natural beauty.
Advertisement
  • Municipal requirements: Toronto’s permit guidance requires an application where construction, access or storage affects a protected tree’s Tree Protection Zone (TPZ); where work does not affect the TPZ, nearby trees still require protection and a Tree Protection Plan prepared in consultation with an arborist.[2]
  • Recommended investigation deliverables: Specify the investigated area, observed versus interpreted findings, depth and location references, and uninvestigated areas. These are commissioning recommendations, not a prescribed Toronto root-map specification.[1][2][3][4]

A root map supports design; it does not authorise excavation or root cutting.[1][2] The municipal provisions discussed here are Toronto-specific, not rules to assume elsewhere in Ontario.[1][2]

Advertisement

1. Define the work envelope—not only the trench

Toronto’s 2016 Tree Protection Policy and Specifications for Construction Near Trees describes the detailed drawing provisions below. It is older guidance; distinguish its specifications from the City’s maintained permit guidance rather than treating every detail as a newly confirmed requirement.[1][2]

The policy describes a disturbance footprint extending beyond the trench. Use it to check whether the plan captures:

  • Excavation and working space: the trench, over-dig, construction traffic, vehicle access, staging, stockpiles and material storage.[1]
  • Proposed changes: structures, services, hard surfaces and grade changes.[1]
  • Existing conditions: buildings, structures, hard surfaces and trees, including neighbouring trees the work could affect.[1]
Advertisement

The policy calls for an arborist’s inventory covering the subject property and potentially affected adjacent properties, recording tree location, species, size and condition.[1] Start the investigation brief with the whole construction operation, not simply a trench line.

Keep the municipal area of consideration separate from the investigation boundary. The policy describes the area of consideration as the disturbed area plus 6 m under the Private Tree By-law, or 12 m under the Ravine and Natural Feature Protection By-law.[1] These are planning extents, not prescribed root-scanning distances.[1]

Ask for the proposed investigation boundary to be outlined separately from the complete work envelope. This distinguishes the area proposed for examination from the wider area construction could disturb.

Advertisement

2. Agree on the method and supervising team

Distinguish roots physically exposed for inspection from interpreted subsurface indications. Air excavation exposes roots for inspection and photography; ground-penetrating radar (GPR) uses reflected signals to indicate possible root locations and depths.[3][4]

Toronto Metropolitan University’s GPR research description identifies noisy outputs, difficult target recognition, variable soil and moisture conditions, and scattering or weakening of signals through complex root systems.[3] A suspected root may instead be another object, such as a water-filled pipe. The machine-learning detector described was a research aim, not a validated commercial accuracy claim.[3]

Advertisement

Consequently, a missed GPR indication should not be treated as evidence of root-free ground.[3] An unexamined area should remain labelled as uninvestigated, not cleared.

Name the supervising arborist and experienced excavation operator in the commission. Toronto’s policy recognises an Ontario-qualified arborist, an International Society of Arboriculture certified arborist, an American Society of Consulting Arborists registered consulting arborist, a registered professional forester, or a similarly qualified person approved by the General Manager, Parks, Forestry and Recreation.[1]

For roots already approved by Urban Forestry for pruning, the policy specifies prior exposure by air excavation, hand digging or low-pressure water excavation, performed by an experienced operator under a qualified, experienced arborist’s supervision.[1] Water pressure must not damage or strip root bark.[1] These provisions concern preparation for approved pruning—not permission to cut roots during an investigation.[1]

As a service example, Tree and Ravine describes a pre-dig visit to designate the excavation area, followed by ISA Certified Arborist-led exploration, inspection, assessment and photography, with a digital Root Exploration Report.[4] This describes a package, not proof of universal detection performance. The cited method descriptions do not establish a verified detection accuracy or minimum detectable root diameter.[3][4]

Advertisement

3. Check the Toronto Tree Protection Plan details

A marked root sketch is not a substitute for the wider Tree Protection Plan described in Toronto’s policy.[1] The policy’s drawing checklist includes:

  • Readable format: a legible drawing at a usable metric scale, with a comprehensive legend, prepared with an arborist report or in consultation with an arborist.[1]
  • Tree identification: locations, species, size and condition, including potentially affected trees on adjacent properties.[1]
  • Protection boundaries: the crown/dripline or minimum TPZ, whichever is greater where applicable, with labelled protection zones and barriers.[1]
  • Measurement references: minimum TPZ distances measured from the outside edge of the tree base; diameter at breast height (DBH) measured 1.4 m above ground.[1]
  • Injury and protection details: excavation requiring root pruning, trees proposed for injury or removal, the extent of proposed injury and proposed protection measures.[1]
  • Complete site overlay: existing buildings, structures, hard surfaces and trees, together with proposed changes and the full disturbance footprint described above.[1]
  • Storage and sediment control: stockpile locations, with excavated-soil stockpiles outside TPZs, fencing and sediment control. The policy specifies OPSD-219.130 sediment control fencing satisfactory to Urban Forestry.[1]

Keep this municipal plan checklist separate from the investigation records below. A drawing can show the proposed protection arrangement without establishing where every root lies.[1][3]

Advertisement

4. Specify marked findings and blind spots

Ask for a drawing that separates where the team investigated from what it found. The following are recommended commission requirements, not a verified Toronto root-mapping specification:

  • Planned versus actual coverage: show the planned investigation boundary alongside the area actually exposed or scanned. Label the method used and portions left uninvestigated.
  • Distinct evidence symbols: separate physically observed roots, interpreted GPR indications and unresolved anomalies so they do not appear equally confirmed. TMU explains that a suspected root in GPR data could instead be another object.[3]
  • Traceable exposed-root findings: link root marks to field notes and photographs, recording dimensions where measured. Tree and Ravine describes inspection, assessment and photography; linking those records to drawing marks is an additional commissioning request.[4]
  • Visible blind spots: mark inaccessible areas, interrupted exploration, uncertain interpretations and method coverage limits. Noise, soil conditions, moisture and root-system complexity can limit GPR detection and interpretation.[3]

Example: An exposed strip beside a proposed trench records findings within that strip. Label the remaining excavation envelope “not investigated” rather than presenting it as cleared.

Toronto’s guidance and the cited investigation descriptions do not prescribe individual-root labels, observed-versus-inferred categories or inaccessible-area notation.[1][2][3][4] Include these in the commission so uncertainty remains visible when the designer uses the drawing.

Advertisement

5. Agree on depth references and survey ties

Before fieldwork, agree how root positions and investigation boundaries will be tied to the project drawing. Request identified survey references or clearly described site features, treating these as commission requirements rather than prescribed Toronto root-mapping standards.

  • Define the depth reference: specify whether findings will show depth below the recorded ground surface or elevations tied to an agreed benchmark. Ask that findings identify their reference.
  • Record vertical coverage: document the investigated depth range and unexamined depths. Distinguish physically observed exposure depths from GPR-interpreted depths; GPR can indicate depth, but soil, moisture and noise complicate interpretation.[3][4]
  • Agree on the drawing deliverable: specify the location reference, required accuracy and usable file format before commissioning the work.

The cited guidance and method descriptions do not prescribe a root-map coordinate system, datum, benchmark, accuracy tolerance, depth limit or CAD/GIS format.[1][2][3][4]

Keep ownership separate from technical drawing ties. Toronto says a property survey can show the relationship between the home, property line and street curb; without a survey, it directs users to contact 311 to confirm tree ownership.[2]

Advertisement

6. Resolve conflicts through redesign and municipal review

A mapped conflict is a design decision, not permission to cut roots. Toronto’s permit process still applies, and submitting an application does not guarantee approval.[1][2]

  1. Overlay and assess. Have the arborist and designer compare findings and uninvestigated areas with the complete work envelope. Identify potential injury and consider revisions before seeking approval for remaining conflicts.
  2. Check the permit trigger. Construction work, access or storage affecting a protected tree’s TPZ requires an application to remove or injure the tree.[2]
  3. Refer protection changes to Urban Forestry. Toronto’s policy calls for reduced TPZs or disturbance within them to be addressed with the arborist and Urban Forestry. Alternative horizontal root protection designed by a qualified professional, such as an arborist or landscape architect, requires Urban Forestry approval under the policy.[1]
  4. Document the proposal. Use the arborist report and Tree Protection Plan to show proposed protection and the extent of proposed injury.[1] The City may require design revisions, and issued permits carry conditions.[2]

For a boundary tree, an owner may apply, but the other owners’ consent is required.[2] A permit neither establishes ownership nor authorises entry onto another person’s property or removal of their tree.[2]

If Toronto refuses an application, it provides written notice. If an application for a permit to remove or injure a tree is denied, the applicant may appeal in writing to Community Council, whose decision is final with no further appeal.[2]

Advertisement

7. Check the final hand-off

Before relying on the drawing, check three groups of items:

  • Municipal documents and review: the complete disturbance overlay, applicable tree inventory, neighbouring trees, TPZs, barriers, proposed injury and status of required approvals.[1][2]
  • Agreed investigation records: actual coverage, exposed versus interpreted findings, depth references, drawing ties and documented blind spots.
  • Open decisions: unresolved design conflicts, uncertain findings, ownership or boundary-tree consent issues, and outstanding review of reduced protection or alternative measures.[1][2][3]

Assign each open question to further investigation, design revision or municipal review. Keep those questions visible: blank areas on a root map do not establish root-free ground, and mapping does not replace the permissions required for excavation or root cutting.[1][2][3]

Advertisement

References

  1. Parks, Forestry & Recreation (toronto.ca, 2016)
  2. When to Apply For a Tree or Ravine Permit – City of Toronto (toronto.ca)
  3. Mapping Tree Roots Using GPR and Machine Learning – Environmental Applied Science and Management – Toronto Metropolitan University (TMU) (torontomu.ca, 2025)
  4. Air Spade Root Exploration and Report | Tree and Ravine (treeandravine.com)
Advertisement

Similar reads