Workplace Transport Risk Assessment: UK Depot Managers’ Requirements
A workplace transport risk assessment must be suitable and sufficient; commission representative observation of vehicle and pedestrian activity, then specify the map, action plan and follow-up checks as contractual deliverables—not a prescribed report template. HSE provides guidance for Great Britain; HSENI provides guidance for Northern Ireland. [1][2]

Separate legal requirements from commissioned deliverables
Start the brief with two distinct checklists.
Legal requirements
- Assess and control risks: employers and self-employed people must assess risks to people affected by their work and take appropriate preventive and protective steps. The assessment must be suitable and sufficient to protect people from predictable harm. [1][2]
- Record significant findings: organisations employing five or more people, including managers, must record significant hazards and the principal conclusions or controls. [1][2]
- Communicate findings: employers must tell employees, including safety representatives, about the findings. [1][2]
Recommended contractual deliverables
- Observation coverage: request a written explanation of the operating periods and activities selected, including gaps requiring further observation. Official guidance calls for a reasonable, representative period. [1][2]
- Usable outputs: specify a traffic map and location-linked findings, supported by an action register with priorities, named owners, completion dates and verification methods. These are commissioning specifications, not a universally mandated template. [1][2][4]
- Implementation and follow-up: agree who makes changes, who checks them in live operation and whether the assessor returns. [4]
An independent report is not compliance clearance. Commissioning it does not discharge the employer’s responsibility to assess risks and implement effective controls. [1][2]
Define representative observation—not automatic attendance on every shift
HSE and HSENI call for observation over a reasonable period—a day, week or month are examples—not fixed hours on every named shift. The test is whether the assessment builds a clear picture of vehicle and pedestrian traffic without missing important activities. [1][2]
Judge proposed coverage against that test, rather than visit length alone. A desk-based layout review cannot provide the observation and worker consultation described in the guidance; ask how these will be covered. [1][2]
As a commissioning tool, ask for a coverage matrix with an entry for each shift or operating period:
- Operating period: the shift or activity window.
- Relevant activities: expected vehicle movements and pedestrian activity.
- Expected conflicts: where those activities overlap.
- Proposed observation: what the assessor intends to witness.
- Evidence gap: what the visit will miss and how that gap will be addressed.
Select windows covering delivery peaks and shift changes alongside quiet-time cleaning, waste collection and less-frequent movements—not only the busiest-looking period. [1][2][4]
If a proposal treats shifts as equivalent, request a written rationale. For activities not witnessed, ask whether another observation window is needed. Gate and stores staff can establish visiting-vehicle timings, while drivers and other workers can identify problems; use their knowledge to target observation rather than automatically replace it. [1][2]
Prepare the vehicle, task and people inventory
Give the assessor an inventory recording activity, time, location and concurrent activity. HSE and HSENI recommend these details for every visiting vehicle; security staff can identify arrivals and stores staff can explain delivery patterns. [1][2]
- Vehicles and tasks: include site and visiting vehicles, deliveries, loading, unloading, waste collection and quiet-time or infrequent jobs. [1][2] HSE’s 2014 guide, HSG136, describes workplace transport as including mobile equipment such as lift trucks—not only road-going vehicles. [3]
- People exposed: identify employees, visiting drivers, contractors, cleaners, maintenance staff, visitors and members of the public who could encounter the activities. [1][2]
- Work elsewhere: include relevant tasks at other premises, such as deliveries to customers. [1][2] HSG136 distinguishes ordinary public-road driving from temporary workplaces such as roadside deliveries. [3]
Supply available plans, operating schedules, existing controls and staff concerns as briefing inputs. Plans support movement mapping; schedules and workers’ accounts help establish what happens. Existing precautions still need their adequacy assessed. [1][2][4]
Trace routes and contractor handoffs
Trace journeys from arrival and driver reporting through parking, manoeuvring, reversing, loading or unloading and departure—not only movement along the main yard road. Include pedestrian doors, crossings, turning areas and places where flows meet. [1][3][4]
HSG136 describes traffic routes as extending beyond marked roadways to pedestrian routes, doorways, gateways, loading bays and ramps. Its route-review advice covers separation, visibility, surface condition, obstructions, width and headroom. [3] Fit2Trade recommends checking conditions from driver and pedestrian positions, using actual vehicles and loads to understand restricted views and clearances. [4]
Agree how darkness, low sun and adverse weather will be assessed rather than prescribing a visit in every possible condition. These variations belong in the hazard review. [1][2]
Trace the information handoff as well as the journey. HSG136 recommends that site operators give contractors information about required routes, site vehicles and equipment, activity risks and controls. It also recommends agreeing safety arrangements before work starts, preferably in writing where different employers’ staff work on the same vehicle during loading or unloading. [3]
Use the brief to identify these interfaces. Leave detailed choices about separation and other controls to the competent assessor and site management’s site-specific evaluation. [1][2]
Compare scope and exclusions before accepting a proposal
Compare proposals against the same headings rather than relying on the service title:
- Observation: which operating periods and conditions will be witnessed, and how will the coverage capture representative work? [1][2]
- Routes and activities: does the scope connect vehicle and pedestrian routes with deliveries, loading and waste collection? [1][2]
- Internal operations: are pallet-truck and forklift operations included? An outdoor layout assessment may exclude them. [5]
- Exclusions and interfaces: identify who will assess excluded activities and coordinate risks where activities meet. HSG136 recommends coordination between site operators and contractors. [3]
- Outputs and follow-up: specify the movement map, action register and responsibility for checking changes in operation. [4]
TMS Consultancy illustrates the scope distinction: it describes its UK service as a private-road/outdoor layout assessment, excluding complex internal matters including pallet- and forklift-truck operations, manual handling, and vehicle-detection or warning systems. [5] The cited page does not state an exact report package or contractual follow-up provision; request both in writing. [5]
Specify a usable traffic map and action plan
Request a dated traffic map showing vehicle and pedestrian routes, relevant cyclist routes, doors, crossings, loading points, parking, reversing and turning areas, and places where movements meet. Fit2Trade recommends these features and dated plans or photographs. [4]
For location-linked findings, specify a common identifier across the map, findings, photographs and action register. This is a practical commissioning format, not a prescribed legal document.
Ask for these action-register fields: location, task, people exposed, hazard, existing controls, remaining gap, action, priority, named owner, realistic completion date and verification method. They combine the risk findings and recommended action records into a usable structure. [1][2][4]
Priority should reflect likelihood and severity: an unlikely event can still warrant high priority if it could cause serious harm. Existing precautions must be evaluated, not simply listed as evidence of control. Improvements should be prioritised by risk and given realistic completion dates. [1][2]
Recommendations should first seek to eliminate the problem, then reduce risk, favouring layout or engineering measures where possible rather than relying solely on instructions, training or PPE. [1][2]
Illustrative action-register entry: location: Yard–West, matching the map and photograph label; task: reversing to unload; people exposed: visiting drivers and pedestrians; hazard: vehicle–pedestrian collision; existing control: painted walkway; gap: pedestrians cross the reversing area; proposed action: assess rerouting pedestrians clear of reversing. The assessor determines priority; the completed register names an owner, sets a realistic completion date and specifies observation of unloading and pedestrian movements to verify the change.
Assign implementation and check live operation
Give verification an owner, not only installation. HSG136 recommends allocating health-and-safety responsibilities before work starts. [3] Specify the assessment owner, action owners, who authorises changed arrangements and who checks effectiveness. [4]
Build these recommended checks into the brief:
- Before use: the change owner checks physical controls, signs, information, training and supervision are ready. [4]
- First live use: someone observes movements, identifies unexpected routes or workarounds, records corrections and arranges subsequent verification. [4]
- Action closure: retain evidence of briefings, induction updates and contractor communication alongside dated plans or photographs and verification observations. [4]
- Version history: preserve earlier assessments so the authorised arrangement and action status remain traceable. [4]
State whether site management or the assessor performs follow-up observations, and include any return visit explicitly in the commission. Treat installation and verification as separate stages: “fitted” is not the same as “checked in operation”. [4]
Set the review date and earlier triggers
Set a review date reflecting the work and speed of operational change; HSE and HSENI prescribe no universal annual interval. Review sooner when new vehicles, altered routes or changed work could introduce hazards, and assess significant changes before implementation. [1][2]
Include temporary diversions. As recommended practice, Ireland-based Fit2Trade advises recording an owner, duration or work phase, an end condition and verification when the permanent route is restored. [4]
Before agreeing the commission, check the brief covers representative observation, routes and handoffs, explicit exclusions, location-linked actions, named implementation and verification responsibilities, and a proportionate review date with earlier change triggers. Keep these deliverables distinct from the employer’s continuing duty to assess risks and put effective controls into practice. [1][2][4]
References
- Risk assessment – Workplace transport (hse.gov.uk)
- Workplace Transport risk assessment | Health and Safety Executive for Northern Ireland, controlling risk together (hseni.gov.uk)
- Health and Safety Executive A guide to workplace transport safety Page 1 of 53 (antrimandnewtownabbey.gov.uk, 2014)
- When to Review a Workplace Transport Risk Assessment | Fit2Trade (fit2trade.com, 2026)
- Workplace Transport Risk Assessment – TMS Consultancy (tmsconsultancy.co.uk, 2014)