How to choose hearing loop installation for UK venues
Before signing off a hearing loop installation, obtain the agreed listening-area plan, mapped commissioning results, a certificate, receivers and operating instructions; agree staff demonstrations and ongoing maintenance separately. Ampetronic’s guidance describes the commissioning and handover evidence, while the installer pages do not expressly include on-site staff training in their packages. [2][3][5]

Define exactly where people need to hear
Ask the installer to mark the intended listening area and its use on a plan before design and certification. Ampetronic’s commissioning guidance requires the coverage area and intended use to be defined, with measurements at both seated and standing heights where both apply. [2]
- Reception example: mark the seated service position and standing position at the counter, rather than labelling the whole desk “covered”.
- Public-room example: mark the agreed seating area, making clear which seats the installation is intended to serve.
Ask which neighbouring spaces need assessment for signal spill, and whether conversations require confidentiality. Ampetronic calls for measurements outside the listening area for low-spill systems; where confidentiality matters, it says the distance at which the signal becomes inaudible should be recorded. [2]
Make the practical deliverable one agreed, marked plan showing the listening area, relevant seated and standing positions, and boundaries requiring spill checks. Ask for the survey, commissioning record and acceptance checklist to reference that plan.
Require a survey that explains interference, metal and layout
Ask for written findings on electromagnetic background noise and building metal before accepting an equipment specification. Ampetronic says both affect loop design and amplifier selection and can occasionally make a project infeasible. [1]
The assessment should explain how the proposed layout serves people using the space. Contacta’s installation guidance considers measurements at head height, users’ movement, the current needed to avoid distortion, and cable type, layout and position. [3] Ask Contacta to confirm installation availability in your area.
Ask why the proposed layout suits the findings. Contacta describes perimeter loops as cost-effective for small areas, but susceptible to building metal, signal loss when users tilt their heads, and overspill; it says they are unsuitable where confidentiality is required. Contacta reports that phased arrays have less metal-related impact and significantly less overspill—vendor-reported characteristics to assess against your site, not a reason to specify an array automatically. [3]
As a UK-wide installation example, Strive AV says its survey covers room dimensions, audio sources, metal loss, listed-building constraints and overspill risk before selecting the system, driver, cable route and audio feed. [5]
Request findings, design consequences and unresolved risks in writing. Make that explanation an agreed deliverable rather than assuming “survey included” means a separate report.
Check mapped measurements, not just a certificate
The commissioning record should show where the system was measured, not simply declare a pass. Ampetronic calls for readings from several parts of the loop and diagrams showing measured areas and locations outside the standard. [2]
Ask for labelled test points linked to results so you can check whether the agreed listening positions were assessed. Use Ampetronic’s commissioning guidance as an evidence checklist:
- Area and use: identify the intended listening area and what it is used for. [2]
- Measurement heights: record seated and standing measurements wherever both types of use are intended. [2]
- Individual results: connect test locations to background-noise, field-strength and frequency-response readings. [2]
- Coverage gaps: distinguish compliant areas from out-of-standard locations, including those affected by electromagnetic interference. [2]
- Spill: map measurements outside the listening area where neighbouring loops could interfere; where confidentiality matters, record the distance at which the signal becomes inaudible. [2]
Ampetronic states commissioning criteria of −32 dB or better for A-weighted background noise; field strength of 400 mA/m using a 1 kHz sine wave, within ±3 dB across the listening area; and frequency response from 100 Hz to 5 kHz within ±3 dB relative to 1 kHz. These checks require appropriate measurement equipment, rather than a listening check alone. [2]
Require the quotation and completed record to name the applicable standard and edition. Ampetronic and Contacta cite IEC 60118-4, while Strive AV cites BS EN 60118-4:2015. Ask the installer to explain the designation and edition it will apply rather than assuming those references are interchangeable. [2][3][5]
Request the paperwork before booking
Strive AV promises a commissioning certificate and test record, but its cited page does not show a sample or specify the number or spacing of measurement points. [5] Ask to see the proposed paperwork before accepting the quotation.
Ampetronic calls its handover record a Certificate of Test and Conformity and describes diagrams and readings from several parts of the loop. [2] Use that as a benchmark for your request, not evidence that every installation package includes identical paperwork.
Please send a blank or anonymised commissioning record, the proposed measurement locations and heights, the outside-area tests where relevant, and how exceptions and retesting will be recorded.
Ask the supplier to confirm that the completed record will reference your agreed listening-area plan and contain actual results against measurement locations, rather than only a pass statement.
Agree how out-of-standard positions will be remedied and retested, or explicitly excluded from the agreed coverage before acceptance. Put responsibility for investigation, corrective costs and approval in the agreement.
Agree receivers, staff demonstrations and ongoing checks
Make the handover agreement cover equipment and instructions, a staff demonstration, and responsibility for checks—not just the commissioning record.
- Equipment and instructions: Ampetronic says the client should receive adequate loop receivers and usage instructions. Ask the supplier to specify the quantity and agree where staff will use them to check the system. [2]
- Staff demonstration: request its scope and attendees explicitly, including switching on, selecting the audio source, listening at agreed positions and reporting faults. Dean Frank Reynolds recommends that desk staff know how operation was checked, when it was last tested and whom to call. [4]
- Ongoing responsibility: Ampetronic warns that faults can go unnoticed and recommends regular simple operational checks. [1] Agree who checks, how often, when specialist maintenance is needed, and the escalation and response arrangements.
Ampetronic’s practical installer course is not presented as part of a venue-staff handover package. [2] Specify the demonstration you want rather than treating installer training as a promise to train venue staff.
For a venue-owned log, record the check date, listening location, result, reported fault, action and responsible person. Keep this working record with the instructions so staff can consult it and pass it to the maintainer. Routine listening checks should remain distinct from measured commissioning. [2]
Check the price against the installation scope
Check that the price covers the agreed listening area and commissioning evidence, not just equipment. Strive AV’s UK-wide installation service gives these published ranges—not independently established UK averages:
- Counter loop: £300–£900 installed; Strive describes this as a half-day job. [5]
- Meeting-room or classroom perimeter system: £1,500–£4,000. [5]
- Hall or church system: £4,000–£12,000. [5]
- Phased-array system for metal-framed buildings or overspill control: £10,000–£25,000+. [5]
Strive says its installed prices include the driver, cable, microphone or commercial-audio feed, commissioning and signage, with a certificate described for installed packages. Its £150–£400 portable units are supply only, not a fixed, installed and commissioned package. [5]
Ask for survey work, test records, receivers, staff demonstrations and maintenance to be itemised, showing what is included and what costs extra. Strive’s hearing loops page offers a survey[6], but does not publish annual-maintenance prices. [5] Strive AV lists typical installed and commissioned costs of £300–£900 for counter loops, £1,500–£4,000 for meeting rooms and £4,000–£12,000 for halls or churches; request VAT treatment and quotation validity before budgeting. [5]
Put responsibilities and terms in writing
Alongside the itemised price, ask for a responsibility schedule naming who supplies each deliverable and who at the venue approves it. Check the quotation covers:
- The agreed listening-area plan, survey findings, chosen layout and audio feed.
- The commissioning standard, mapped measurements, certificate and test record.
- Signage, receivers and operating instructions.
- The staff demonstration, routine checks, fault reporting and maintenance.
Strive AV’s package includes commissioning, a certificate/test record and signage; those inclusions do not settle every support or commercial term. [5] Request the minimum contract term, cancellation and refund terms, warranty, insurance details and fault-response commitment in writing. Choose on documented scope and agreed responsibilities, rather than the package label.
Use a final checklist before accepting the work
Check the completed work against the original brief:
- Listening area: recorded coverage matches the agreed positions, including seated and standing heights where relevant. [2]
- Survey risks: the installer has explained how the design addresses identified metal loss, interference and overspill. [1][5]
- Mapped results: individual test locations, coverage gaps and relevant spill or confidentiality boundaries are recorded. [2]
- Filed evidence: retain the dated certificate and test record. [4][5]
- Usable handover: receivers and instructions have arrived; confirm completion of the agreed staff demonstration and allocation of checking, maintenance and fault-reporting responsibilities. [2][4]
A sign, power light or verbal assurance is no substitute for commissioning records and mapped results. [2][4][5] For an existing loop without records, Reynolds’ distinction is useful: describe it as untested, not automatically absent, compliant or broken. [4]
Record missing evidence and corrective work through the agreed sign-off process. Accept the evidenced listening area and agreed handover—not merely the installed hardware.
References
- Testing and maintaining – Ampetronic (ampetronic.com)
- Commissioning an Induction Loop System (ampetronic.com)
- Hearing Loop Installation | Contacta (contacta.co.uk)
- What Is a Hearing Loop, and How Do You Know Yours Works? (deanfrankreynolds.co.uk, 2026)
- Hearing Loop Systems UK | Installation, Cost and Equality Act | Strive AV (striveav.com)
- AV Installers UK | Locations We Cover | Strive AV (striveav.com)