HROUS

Masonry Prism Testing: Quote Requirements for US Project Managers

Advertisement

A masonry prism testing quote request should identify the project-specified ASTM edition, assign specimen construction and handoffs, and define charges and report delivery. Keep test-method requirements separate from the commercial terms you ask the laboratory to accept.

Advertisement
Detailed texture of a red brick wall for background and design use.
  • Project requirements: Copy the governing edition, testing scope and reporting schedule from the project documents.
  • Verified method conditions: Under C1314-24, research deviations must be reported, and deviating research prisms must not be used to verify compliance with specified compressive strength. [2]
  • Terms to agree: Name the parties responsible for specimens, transport and receipt; request itemized pricing and traceable reporting.
Advertisement

1. Find the governing specification and reporting date

Active does not automatically mean project-specified. ASTM lists C1314-24 as active. [2] ASTM’s historical C1314-21 page, last updated in August 2022, identifies an earlier edition; SPEC MIX’s 2015 field-testing guide cites C1314-03b. [3][4] These references identify different editions, not which edition your project adopts.

Put these fields at the top of the request:

  • Project reference: Name, specification section and revision.
  • Method: Exact ASTM designation and edition from the governing documents.
  • Specimen origin: Identify companion prisms or prisms obtained from field-removed masonry, both within C1314-24’s scope. [2]
  • Schedule: Project-specified testing age, planned test date and required report date.

If the edition is missing or conflicting, resolve it with the designated project reviewer before asking the laboratory to finalize its scope. Keep testing ages and dates as placeholders until checked against the project documents.

Agree on a commercial laboratory report deadline separately from C1314-24’s test-method requirements. [2] Ask the laboratory to confirm the testing date and report delivery date separately, against the project’s review schedule.

Advertisement

2. Separate test requirements from project conditions

Request the tested masonry compressive strength, fmt, rather than using it interchangeably with specified compressive strength, f′m. C1314-24 determines the tested value for use in determining compliance with the specified value. Companion prisms serve that strength-compliance purpose; they are not intended to reproduce every performance or design attribute of the completed masonry element. [2]

Keep advisory language and project conditions distinct:

  • Advisory language: C1314-24 says the laboratory “should” be evaluated under ASTM C1093. That passage is advisory, not evidence a particular laboratory is accredited. [2]
  • Project conditions: Identify laboratory qualifications and acceptance criteria required by the project documents separately. Request evidence addressing those qualifications.

Ask the laboratory to identify whether it proposes compliance or research testing, state the result to be determined and disclose proposed deviations before authorization. Leave the acceptance threshold and engineering review to the applicable project requirements rather than framing one test as approval of the masonry.

Advertisement

3. Assign specimen construction, identification and custody

Assign companion-prism fabrication explicitly when arranging testing under ASTM C1314. [2] Do not automatically place it with the mason, contractor, owner or laboratory.

Use the following as a proposed responsibility checklist, not an ASTM-required form. For each task, record the organization and contact, required information, completion point and quote inclusion:

  • Material supply and construction or extraction: Name the responsible party, specimen origin, project instructions and readiness milestone.
  • Identification: Assign responsibility for specimen identifiers and intended masonry locations before release.
  • Pre-handoff custody: Name the custodian and holding location, and agree on the custody record.
  • Release: Identify who authorizes handoff and provides the specimen list.
  • Collection or delivery: Name the booking party, transporting party, release contact and destination.
  • Laboratory receipt: Name the contact who acknowledges delivery and reports discrepancies.

As a project coordination choice, use a unique identifier built from the project code, intended masonry location and a unique specimen suffix. Agree on who assigns it; the format is not presented here as an ASTM requirement.

For field-removed masonry, C1314-24 references ASTM C1532/C1532M for sampling and calls for professional judgment in specimen preparation, net-area determination and interpretation of compression-test results. Assign that work explicitly rather than treating extraction as ordinary specimen fabrication. [2]

Advertisement

4. Define transport and laboratory receipt

Carry the responsibility assignments through confirmed laboratory receipt, not just release from the site. Agree with the laboratory on handling arrangements, the delivery location, receiving hours and responsibility for unloading or transfer.

Propose a handoff record containing:

  • Specimen identifiers and quantity.
  • Release and receipt dates.
  • Releasing and receiving contacts.
  • Observed specimen condition.

Ask how the laboratory will notify you of missing, damaged or unmatched specimens. Record who resolves discrepancies and who authorizes any additional collection. These are proposed service arrangements, not an ASTM custody checklist.

Oak Ridge’s hollow-clay-tile program used protective fixtures for extracted prisms during removal and transportation; that historical example does not establish a fixture requirement for ordinary C1314 specimens. [1] Do not borrow SPEC MIX’s 24-hour ±4-hour transport instruction either: it concerns C780 mortar cubes, not C1314 masonry prisms. [4]

Advertisement

5. Compare laboratory, site and pickup charges

ASTM lists C1314-24 at $80 and historical C1314-21 at $86. Those prices buy standards—not compression testing, specimen pickup or report delivery. [2][3]

Ask each bidder to itemize these categories as commercial terms, not ASTM-required charges:

  • Laboratory testing: Pricing basis, included specimen quantity and testing scope.
  • Specimen preparation: Work included in testing and separately priced preparation.
  • Site attendance: Charge basis and included time or visits.
  • Pickup or delivery: Transportation charges and what they cover.
  • Additional trips: Charge basis and circumstances triggering another billable visit.
  • Reporting: Requested services outside the base price, including any expedited service.

For each category, request quantities, exclusions and additional-charge triggers, even if marked “included.” Use the bidder’s project-specific quotation for laboratory prism-testing and pickup charges rather than treating SPEC MIX’s educational guide as a price schedule. [4]

Check that the quotation and responsibility checklist agree: a transport price does not by itself resolve who books collection, releases the specimens or confirms laboratory receipt.

Advertisement

6. Agree on report delivery and specimen matching

Request written confirmation of the report delivery date, recipients and format. Do not treat a requested date as an accepted commitment. Agree on who communicates schedule changes, how revised dates are acknowledged and how corrected reports reach recipients.

C1314-24 establishes tested masonry compressive strength, fmt, as the result and expressly requires disclosure of deviations when used as research guidance. [2] The cited ASTM webpage does not provide a complete mandatory report-field list. [2] SPEC MIX lists a C1314 report form, but that listing should not be treated as a mandatory ASTM reporting checklist. [4] Confirm reporting requirements against the governing edition and agree on project deliverables with the laboratory.

Advertisement

Agree on the following as project deliverables, not a verified ASTM report checklist:

  • Project and method: Project reference and governing ASTM edition.
  • Specimen matching: Identifiers and quantity, with a cross-reference between project labels, laboratory numbers and delivery records.
  • Dates and details: Construction and test dates where applicable, dimensions and masonry-material information.
  • Results: Clearly associated strength results identifying the specimens represented.
  • Condition and observations: Receipt condition kept separate from testing observations, with any desired failure-description fields expressly defined.

For example, if delivery records use project labels but the report uses laboratory numbers, request an explicit cross-reference. Do not assume matching quantities or listing order establishes a match.

Before routing the report to the project reviewer, compare it with delivery and receipt records. Flag missing specimens, unexpected identifiers and unclear substitutions; request clarification or correction rather than silently reconciling discrepancies.

Advertisement

7. Assemble the quote request before authorizing work

Use this compact request to bring the scope, handoffs and deliverables together:

Please quote masonry prism testing against the following scope:

  • Governing documents: [Specification section, attachments and required ASTM C1314 edition].
  • Specimens: [Origin, quantity and identification scheme].
  • Responsibilities: Material supply and construction—[party]; identification and custody—[party]; release—[party]; transport—[party]; laboratory receipt—[party].
  • Handoffs: [Locations, contacts, dates and receipt documentation].
  • Pricing: [Testing, preparation, site attendance, transport, additional pickups and exclusions].
  • Schedule: [Availability, receipt, testing and report delivery dates].
  • Report: [Recipients, format, specimen cross-reference and agreed fields].

Confirm each item as included, excluded or requiring clarification, and identify proposed departures from the requested scope.

Complete the blanks using the project specification and laboratory proposal. Resolve unassigned responsibilities, edition discrepancies, unexplained extra-trip charges and unconfirmed report dates before authorization, and obtain written agreement on commercial and reporting terms.

References

  1. Test procedure for prism compression testing (Technical Report) | OSTI.GOV (osti.gov)
  2. C1314 Standard Test Method for Compressive Strength of Masonry Prisms (astm.org, 2025)
  3. C1314 Standard Test Method for Compressive Strength of Masonry Prisms (astm.org, 2022)
  4. FIELD SAMPLING & (specmix.com)
Advertisement

Similar reads