HROUS

Timber crane mats for Canadian buyers: rental order requirements

Advertisement

Carry the approved platform specification into the rental order

A crane-mat rental order should record the approved dimensions and construction, specified features, available condition evidence, and agreed delivery, rejection and return arrangements. Separate project requirements from supplier options:

Advertisement
A mobile crane parked on an urban street in Vilnius, Lithuania.
  • Required by the project specification: record the drawing or document identifier and revision, mat type, quantity, width, length, thickness and construction.
  • Required features versus options: identify specified timber, fasteners, reinforcement and lifting-point details; distinguish included features from options selected for the order.
  • Recommended written agreements: record condition evidence, receiving checks, discrepancy handling and return responsibilities.

These are recommended procurement fields, not a prescribed Canadian form. Northern’s, Raven’s and Johnston’s cited pages establish neither mandatory order documents nor platform capacities.[1][2][3]

Use the supplier’s description to check the match—not reinterpret the design. Keep soil suitability, platform design and allowable load with the engineer or lift team. Refer mismatches and proposed substitutions to the person responsible for the specification.

Approved specification → supplier comparison → technical resolution of differences → agreed order → delivery handoff.

Advertisement

Compare dimensions before accepting a product match

Match dimensions and construction, not just the “crane mat” label: Raven and Johnston use it for products with different specifications.[2][3] Put each quote into labelled width, length and thickness fields, retaining the supplier’s product name.

  • Northern — crane mats. Featured size: 4 ft wide × 20 ft long × 12 in thick, with custom sizes available. Northern lists standard-sawn 8 × 8 in, 10 × 10 in or 12 × 12 in timbers.[1] Identify the timber section and overall dimensions quoted; do not assume every section applies to the featured size. Northern describes manufacturing, delivery and installation; ask it to confirm rental availability and the package offered.[1]

  • Raven — crane mats. Published dimensions: 4 ft wide × 16, 20 or 30 ft long × 12 in thick.[2] Raven lists ply, top and core configurations under its separate access-mat products.[2] Record the selected length and obtain the crane mat’s construction description rather than transferring access-mat specifications into the order.

  • Johnston — standard rig/crane mats. Published dimensions: 8 ft wide × 20 or 40 ft long × 6 in thick. Construction comprises 6-in steel rails tightly packed with 6-in-thick timbers, with notched ends forming flat working surfaces.[3] Check this steel-and-timber construction against the specified product rather than treating it as interchangeable with a solid-timber mat.

  • Johnston — crane/swamp mats. Published lengths: 12–32 ft, using 12 × 12 in Douglas fir timbers.[3] Obtain the assembled width and overall thickness for the quoted unit; the timber-section measurement is not a complete mat specification.

An unmatched dimension or construction remains a specification question. Refer it for technical resolution before confirming the order.

Advertisement

Separate standard construction from optional features

Mark features included, optional or unconfirmed, tied to the selected product and approved specification. Check the quoted construction—not a photograph or another mat family’s description.

  • Northern crane mats: Northern specifies premium “#2 or better” Douglas fir, hemlock or hardwood lumber and heavy-duty countersunk bolts. It identifies 1-in rods as standard for its 4-ft x 20-ft x 12-in crane mats; notched or cabled ends and 1¼-in reinforcement rods are optional.[1]
  • Northern timber mats: Its separate timber-mat description specifies red and white oak or mixed hardwood, SAE Grade #2 bolts, and “minimal stain and wane”. Do not automatically apply these details to its crane mats.[1]
  • Johnston rig/crane mats: Notched ends form part of the standard steel-rail/timber construction. Johnston’s separate crane/swamp-mat description specifies Douglas fir; keep the descriptions on separate order lines.[3]

For a lifting point or handling feature required by the approved specification, record the exact feature and obtain supplier confirmation for the quoted mat. Ask Northern or Johnston to confirm any required certified lifting capability or interchangeability of handling features for the quoted product.[1][3] Do not treat notched or cabled ends as that assurance.

Where a required construction detail is missing, mark it unconfirmed until resolved rather than borrowing information from another product family.

Advertisement

Distinguish condition claims from inspection evidence

Internal quality checks, washing and fleet maintenance are different assurances—not interchangeable evidence that particular mats meet project acceptance criteria.[1][2][3]

  • Northern: Northern says every mat passes through its internal quality-assurance team before delivery. These are supplier quality and product-condition statements, not a universal rental acceptance threshold.[1]
  • Raven: Raven describes washing to remove contamination, debris and unwanted material. Cleanliness is the stated outcome, not a structural inspection result.[2]
  • Johnston: Johnston says its rental fleet is maintained to avoid job delays. That is a fleet-maintenance assurance rather than a mat-by-mat inspection record.[3]
Advertisement

Ask Northern, Raven or Johnston to identify any grading or inspection framework, inspection certificates, mat identifiers, inspection frequency, allowable damage thresholds and repair limits applicable to the quoted mats.[1][2][3]

Request an inventory of available evidence: mat identifiers, batch references, inspection records, photographs and repair information. For each record offered, note what it covers and how it corresponds to the supplied mats; do not assume the records exist.

Obtain project-specific condition criteria from the responsible technical party and record the agreed criteria in writing. Keep the required condition separate from the evidence offered to demonstrate it.

Write the receiving arrangements before dispatch

Carry the agreed condition criteria into a receiving plan. Separate available services from the scope booked: Northern describes delivery and installation capability; Raven offers transportation, installation and washing; Johnston offers installation crews.[1][2][3]

Advertisement

Before dispatch, agree and record:

  • Delivery access: location, access constraints, site contact and receiving representative.
  • Handling: who unloads the mats and what installation service, if any, is included.
  • Receiving checks: who compares quantities, dimensions, product identity and visible condition with the order, using the agreed technical criteria.
  • Receiving record: whether it includes a delivery ticket, available mat or batch identifiers, photographs, discrepancies and the names of those recording them.

Ask the selected supplier to confirm the required handover documents and its commitments to delivery-ticket, photographic-record and handover-inspection procedures.[1][2][3] Get the receiving plan agreed rather than assuming the advertised service includes it.

Advertisement

Agree how damaged or non-conforming mats will be handled

Add a written discrepancy process naming who receives notice, who assesses conformity against the specification and who can authorise replacement or another resolution. Ask the supplier to agree rejection criteria, segregation arrangements, replacement procedures and consequences of accepting non-conforming mats.[1][2][3]

  • Separate mismatches from condition concerns. Record wrong dimensions or construction against the relevant order requirement; describe suspected damage separately. Refer technical questions to the specification issuer rather than inventing an allowable-damage threshold.
  • Agree the evidence. Specify photographs, measurements, affected quantities and available identifiers, with the delivery reference and names of those reporting the discrepancy.
  • Identify disputed units. Agree how they will be marked and kept separate pending a documented decision. Distinguish receiving observations from technical approval.
  • Record the resolution. Agree collection and replacement arrangements, availability and freight responsibility. Specify how unresolved discrepancies will appear on receiving paperwork.

Put agreed remedies in writing rather than assuming immediate replacement, a refund or a right to reject.

Advertisement

Allocate return, freight and washing responsibilities

Carry the allocation of responsibility through to return. Ask the supplier to agree the allocation of outbound and return freight, loading, unloading and washing responsibility between supplier and renter.[1][2][3]

Name the supplier, renter or agreed contractor responsible for each task:

  • Transport: who arranges and pays for outbound and return freight, and the agreed return location.
  • Handling: who provides equipment and personnel for loading and unloading at each end.
  • Washing: who arranges and pays for cleaning, and the agreed return condition.
  • Condition records: who prepares dispatch and return records, how photographs and notes will be compared, and who resolves disputed damage or cleaning requirements.

Agree condition criteria rather than inserting an assumed allowance for wear. Also identify the transaction: Johnston offers rental, purchase and lease-to-own arrangements, so record the selected arrangement and its return obligations.[3]

Advertisement

Use a final rental-order handoff checklist

Put the details and remaining questions into one record for the supplier and receiving team. For each item, record the answer or document reference, name the person responsible for confirmation and mark confirmed, unresolved or not applicable.

  • Specification match: approved document identifier and revision; quantity; width, length and thickness; supplier confirmation of the offered match. Refer differences to the responsible technical party.
  • Construction and features: product construction, included features, selected options and specified lifting-point details, confirmed for the quoted mat.
  • Condition and traceability: agreed condition criteria; available inspection records, photographs and mat or batch identifiers; references linking evidence to supplied units.
  • Delivery and discrepancies: receiving contact, access, unloading responsibility, recording method, discrepancy contact and agreed rejection or replacement arrangements.
  • Return: return arrangements and responsibility for freight, loading, unloading, washing and condition comparison.

Keep unresolved specification differences with the responsible technical party; the label “crane mats” alone does not establish a match.

References

  1. Crane, Timber, and Digging Mats by Northern Mat & Bridge (northernmat.ca)
  2. Mat Rentals – Raven Oilfield Rentals (ravenoilfield.com)
  3. Crane Mat Rentals – Johnston Construction (bcbridgebuilder.ca)
Advertisement

Similar reads