How to Choose a Roof Drone Inspection: South Florida Owners
Choose a roof drone inspection by specifying a location-labeled condition report, written observations and coverage exceptions—not simply a flight or a folder of aerial photographs. Those deliverables connect visible concerns to roof areas and identify what could not be assessed. [2][4]

Compare two published services for a Miami property
NOS Home Inspections / Advanced Inspection Technologies
The provider lists Miami-Dade and Broward County. Its drone page says imaging is included with most full-home and 4-point inspections when conditions require it, and is also available as a standalone service. It describes high-resolution views of ridges, valleys and flashing.[1] A home-inspection bundle and a separate drone commission are different purchases: ask the quote to state which roof areas, observations, files, price and report deadline apply.
OwlTech Home Inspections
OwlTech lists roof drone inspections for the Miami area, describing close-up views of roofs and the upper exterior. Its service menu lists a phone number to call.; the separately published residential, condo and 4-point prices are not drone-inspection prices.[5] Have the proposal identify whether you are buying a standalone roof survey or a larger inspection, and specify its reporting and coverage.
Compare the same deliverable
For an address both firms accept, send the same roof question and building details. Compare conditional versus separately commissioned drone work, covered components, interpreted written findings, originals, limitations and the total job price.[1][5] Do not select on a general home-inspection starting fee or assume a flight is included merely because the firm owns a drone. Confirm address acceptance before booking; the named service areas are not a promise of availability for every South Florida property.
Define the roof question and inspection area
Give the assignment a primary purpose: baseline condition recording, post-event documentation, repair verification or investigation of a visible concern. The purpose should shape the capture plan rather than a general request to “photograph the roof.” [3][4]
Identify who will use the evidence—a roofer, engineer or adjuster—and the decision they need to make before choosing the images and report format. [2][4]
Turn that question into a property-specific scope: name each building and roof plane, then list the edges, valleys, flashing, penetrations, drainage points and rooftop equipment to be covered. Explicitly include or exclude connected exterior elevations and interior investigation. [2][4]
Use this drafting aid to start the scope:
“Inspect [building and roof area] to document [purpose and visible concern]. Provide [overview and detail images, location labels and written observations] for review by [roofer, engineer or adjuster]. Include [components and connected areas]; exclude [areas outside the assignment].”
Verify the pilot, insurance and roof reviewer
Check flight qualifications and roof-condition expertise separately. Flight skill does not establish expertise in interpreting roof conditions. [2][4] Advanced Inspection Technologies lists Florida inspection license HI 12494; ask it to confirm drone-pilot certification and insurance details. [1]
Ask the proposal to identify these responsibilities:
- Flying or supervising the aircraft: Name the remote pilot responsible for the operation and request confirmation of relevant certification. [2]
- Interpreting roof conditions: Name the person turning images into observations and ask about relevant roof-inspection experience. [2][4]
- Accepting or escalating findings: Identify who reviews the evidence and recommends specialist assessment. [2][4]
The FAA describes Part 107 as the route for work or business operations with small drones weighing less than 55 pounds.[6] Ask the operator to identify the responsible remote pilot, applicable certification and operating basis, and any airspace authorisation or waiver needed for this site. Verify inspection expertise and project insurance separately from permission to fly.
Also request a site-specific operating plan addressing property-access permission, launch and recovery space, occupants, neighbors, traffic, wires, trees and other obstacles. Ask how the operator will assess weather, airspace authorization, temporary flight restrictions and visual line of sight. [2][4]
Put report deliverables in the quote
Connect every agreed roof component to usable images or a recorded coverage exception. Ask these questions before accepting the quote: [4]
- “Will the images show both location and detail?” Request property-orientation views, an overhead overview, angled overviews of every agreed roof plane and paired context/detail images for each suspected defect. Ask what image detail will make the components assessable rather than relying on photograph count. [2][4]
- “How will each finding be identified?” Require the building, roof plane or zone, component and image reference alongside a neutral written observation. Ask the reviewer to distinguish visible conditions from diagnosis and recommend an action such as monitor, maintain, inspect physically or test further. [2][4]
- “Which files and records are included?” Specify full-resolution originals with metadata intact, an indexed image manifest, a roof-coverage diagram, capture conditions, the named reviewer and a limitations or exception log. [4]
- “What gets checked before the crew leaves?” Drone Authority’s guide calls for reviewing focus, glare, motion, occlusion and missing facets before leaving the property. [4] Each scoped component should appear in the image manifest or exception log; each reported finding should have usable context and detail views. [4]
Hypothetical report entry: “Main building, east roof plane, skylight flashing: a visible gap at the lower corner appears in context image EAST-A and detail image EAST-B. Have a roofer inspect the connection closely; watertightness has not been established.” This gives a location, observation and next step rather than an unexplained “flashing issue.” [2][4]
Record unobserved areas and limits
Keep observed conditions and coverage exceptions separate. An unseen component should not be recorded as defect-free. Ask the report to identify out-of-view components, obstructions, reflections, weather limitations and areas where image detail was insufficient for assessment. [2][4]
Visible-light images document surface conditions. They cannot establish concealed deck or underlayment condition, fastener security, structural capacity, exact leak paths or insurance coverage. A clean-looking aerial view does not replace physical checks or examination of concealed layers. [2][4]
Advanced Inspection Technologies says its drone provides the same level of visual detail as a walked inspection. That is the provider’s claim; FPVDrone and Drone Authority describe limitations involving concealed conditions and physical examination. For commissioning purposes, do not treat visual detail as equivalence to a hands-on inspection. [1][2][4]
Ask: “What happens if an agreed area cannot be documented?” Agree whether that means a disclosed limitation, revised scope, return visit or separately commissioned inspection. Require the report to distinguish incomplete coverage from areas assessed. [2][4]
Decide whether thermal imaging or mapping is needed
Treat thermal imaging and mapping as separate scope decisions, not presumed inclusions in a visual condition report. Each needs a capture plan and deliverables matched to the question. [2][4]
For suspected moisture: thermal imagery records surface-temperature patterns—not water itself. Sun exposure, wind, shading, roof materials and repairs can affect those patterns. Request paired thermal and visible-light images labeled by roof area, capture conditions, equipment settings, the interpreter’s relevant qualifications and a verification plan. [2][4]
Verification may involve moisture testing, interior inspection or targeted sampling. A thermal anomaly alone is not a confirmed leak. [2][4]
For measurements or models: specify who will use the output and for what purpose. Ask how capture geometry, reference coordinates, control points, accuracy checks and missing surfaces will be documented. A model is not automatically an engineering model, an as-built record or a legal survey; accuracy needs validation for its intended use. [4]
If the downstream reviewer does not need thermal data or measurements, prioritize a complete, location-indexed visual evidence package. [2][4]
Agree who follows up unresolved findings
Ask for each unresolved finding to lead to a recommended action, with a named reviewer—not simply a “further inspection” note. [2][4]
- Missing or displaced coverings; flashing concerns: Arrange qualified roofing evaluation to establish concealed conditions and repair scope. Visible gaps or damaged flashing may warrant close inspection and controlled water testing. [2]
- Ponding or blocked drainage: Ask whether drainage service, roof-level inspection or moisture investigation is needed to assess blockage, saturation or underlying cause. [2]
- Interior staining or active moisture: Follow the evidence with interior tracing and targeted attic, plumbing or roof investigation. Aerial views cannot rule out plumbing, HVAC or condensation sources. [2]
- Visible sagging or deformation: Obtain qualified roofing or structural evaluation; photographs cannot establish load capacity or concealed deterioration. [2]
Have the proposal identify who recommends follow-up, whether further investigation is included and who commissions it. Treat moisture verification, engineering conclusions, repair design and insurance determinations as separate work unless expressly scoped; a visual evidence package does not itself provide them. [2][4]
Approve price, timing and contingency terms
Put completion criteria and payment terms in writing. Ask for separate descriptions and costs for flight and capture, report interpretation, optional thermal or mapping work, and any return visit or specialist follow-up. These are requested quote breakdowns, not a standard fee structure. [2][4]
Ask the selected provider to put cancellation, rescheduling, refund and workmanship terms in the proposal, together with the drone-survey price, agreed files and report deadline.[1][5]
Ask what happens if weather, airspace restrictions, property access or unusable images prevent completion: who decides to stop, what incomplete evidence you receive, whether rescheduling is offered and what charges or refunds apply. Record inaccessible areas and image-quality failures as exceptions rather than silently omitting them. [2][4]
Check the written proposal before booking:
- Purpose and coverage: Roof question, buildings, roof areas, permissions and exclusions. [2][4]
- Evidence and responsibility: Labeled originals, located observations, coverage exceptions, pilot and roof reviewer. [2][4]
- Price and timing: Total price, optional-work charges, delivery date and incomplete-capture arrangements. [1][4]
- Terms and data: Cancellation, refunds, warranty, file ownership, privacy, retention and site requirements. [1][2][4]
Choose a proposal with traceable findings, explicit coverage limits and a defined next step if the roof concern remains unresolved—not the largest photograph count. [2][4]
References
- Drone Roof Inspection | Nos Home Inspections (noshomeinspectors.com) (noshomeinspectors.com)
- Drone Roof Inspections: What Aerial Imaging Can and Cannot Detect (fpvdrone.net) (fpvdrone.net)
- How Commercial Property Owners Benefit from Drone Roof Inspections (generalforensicengineers.com) (generalforensicengineers.com)
- Drone Inspection Checklist & Deliverables Scope Builder | Drone Authority (droneauthority.org) (droneauthority.org)
- Services & Fees — Roof Drone Inspections, OwlTech Home Inspections (owltechinspections.com)
- Certificated Remote Pilots including Commercial Operators — FAA (faa.gov, 2021)