Wedding ring engraving in the UK: Birmingham and Kent services
For an existing wedding band, Manna offers assessment and wording confirmation at its Birmingham workshop; Blackwell’s Kent service explicitly includes a pre-cut visual mock-up. Both describe working on customer-owned rings, but agree suitability, price and completion arrangements for your particular band before authorising engraving.[2][5]

Compare Manna and Blackwell
Manna Jewellers
- Existing-band acceptance and assessment: Bring your ring to Manna’s Birmingham Jewellery Quarter workshop and discuss the request with a jeweller, who advises what will work for that piece.[2]
- Inscription approval: The appointment covers wording, font and placement, followed by confirmation of exact spelling and punctuation. Ask Manna for a visual mock-up to approve the layout and fit as well as the text.[2]
- Completion arrangements: Manna says standard engraving is usually completed within a few days and asks customers to declare deadlines when booking. Collection includes checking the inscription before leaving. Agree a collection date rather than relying on the general turnaround.[2]
Blackwell Jewellers
- Existing-band acceptance and assessment: Blackwell’s Kent workshops engrave new and second-hand rings, including adding an inscription to an existing ring years after the wedding.[5]
- Inscription approval: Blackwell says every engraving is proofed and mocked up before cutting, with the design sized against the band and the font adjusted before the tool touches the metal. This goes beyond checking wording alone.[5]
- Completion arrangements: Begin in a Kent store or online. Its article suggests allowing two to six weeks, but this is planning guidance, not an individual collection commitment. Agree the completion date and handover arrangements directly.[5]
Check suitability—not just band width
A width measurement alone cannot settle suitability. Manna warns about legibility below about 2mm; Blackwell describes limited initials or a date on some 1.5mm bands; WeddingsHub warns that many engraving machines cut unevenly below 3mm. These are different limitations, not interchangeable minimum-width rules.[2][4][5]
Ask the jeweller to assess usable space against ring size, stones, hallmarks, metal and plating.[2][4][5] Manna identifies most plain gold, silver and platinum bands, and engagement rings with a plain shank, as engravable. It says full-eternity rings lack a clear engraving surface and engravers normally avoid hallmarks, metal-quality stamps and maker’s marks.[2]
Hard metals need an equipment-specific answer. Wedding Rings Direct excludes tungsten carbide and bands 8mm wide or above from its machine service, while offering laser engraving for titanium and tungsten.[1] Manna says standard methods cannot engrave these metals but some lasers can; Blackwell says they usually need laser. Confirm the workshop’s capability for the actual ring rather than relying on a blanket metal rule.[2][5]
- Machine: suited to straightforward names, dates, initials and consistent lettering, subject to the equipment’s limits.[1][2][4]
- Laser: worth discussing for fine scripts, symbols, fingerprints and hard-metal work where the workshop has suitable equipment.[1][2][4][5]
- Hand: suited to decorative scripts, flourishes and visible variation in hand-cut lettering.[1][4][5]
Plating needs particular caution. Manna advises against engraving plated metals; Blackwell warns that deep hand engraving can wear through plating around letters and require refinishing. Obtain a ring-specific finishing plan rather than assuming a plated band is workable.[2][5]
Do not choose by a supposed depth ranking: Wedding Rings Direct describes its laser work as deeper than machine engraving; WeddingsHub describes laser as shallower than machine engraving, while Manna describes laser engraving as shallow. Ask the workshop to describe or demonstrate its expected result.[1][2][4]
Separate advertised charges from your quote
Manna quotes after assessing the piece; Blackwell’s published figures are broad budgeting guidance rather than a fixed quotation.[2][5] Wedding Rings Direct and Kodega publish the following charges, but their cited engraving pages do not confirm acceptance of customer-owned bands.[1][3]
- Wedding Rings Direct: machine engraving costs £24 per ring, laser starts at £48 and hand engraving starts at £52. Displayed hand-engraving prices include 20% VAT, with shipping calculated at checkout.[1] Its machine service is inside-only and usually accommodates 30 characters, depending on finger size and diamond placement.[1]
- Kodega: inside messages on wedding rings and men's titanium rings start at £24 for up to 25 characters including spaces, depending on font; smaller ring sizes and diamond settings may reduce capacity.[3] Script and Roman Numerals cost £24 inside or £48 outside. Ancient Runes cost £48 inside, £48 outside or £96 for both.[3]
Ask either provider about accepting your ring before relying on those charges. Neither the 25-character nor the 30-character allowance guarantees your wording will fit.[1][3]
Keep market estimates separate. Manna’s general UK guide gives £10–£30 for basic machine engraving, £40–£60 for laser, and £60–£150 or more for hand engraving or complex designs. Its separate £25–£100 range for standard engraving is also market guidance, not a Manna tariff.[2] Blackwell publishes broad expectations of £35–£200 for each method—machine, laser and hand—rather than a fixed Blackwell price.[5]
Request an itemised quote separating engraving from resizing, repairs, re-plating, refinishing and delivery. Compare the total agreed work, not the engraving charge alone.
Approve wording and appearance separately
Send the exact inscription in writing, especially dates and Roman numerals. WeddingsHub identifies verbal instructions as a common source of engraving errors.[4] Check these details before authorising work:
- Text: exact wording, spaces, spelling, punctuation and total character count; check every date and numeral.[2][4]
- Appearance: font or symbol, inside or outside placement, and engraving method.[2][4][5]
- Fit: layout against the actual band’s width, with clearance around stones, hallmarks and other stamps.[2][4][5]
Before cutting begins, approve the text and layout against your actual band. Keep the approved text and any visual proof with the work order, and ask the jeweller to obtain fresh approval if the wording, font, placement or fit changes.[2][5]
A paper mock-up cannot fully show how tiny characters behave on curved metal. Blackwell recommends asking for a sample on a ring of the same width or, where possible, a font demonstration on scrap metal. Ask whether either demonstration is available for your commission.[5]
Agree resizing and finishing before engraving
Complete necessary resizing first. Manna and Blackwell warn that later sizing can stretch, compress or distort an inscription, and may partly remove it. If future resizing is likely, discuss whether re-engraving might be needed.[2][5]
Ask the jeweller to record the order of repairs, polishing, engraving and re-plating for your band. For white gold, WeddingsHub warns that later rhodium re-plating can partially obscure an inscription.[4] Agree how the method and finishing work will preserve the intended appearance.
Have the quotation distinguish included finishing and repairs from separately priced work. Require approval before additional operations begin, and ask for a completion plan covering the whole job—not an engraving-only estimate.
Treat the inscription as permanent. Manna says removal through polishing and refinishing may sometimes be possible, but is not straightforward and may affect the finish. It is not guaranteed reversibility.[2]
Set handover and error-correction terms
Agree a specific collection or dispatch date in writing, and declare any wedding deadline when booking.[2][5]
Distinguish a workshop error from a mistake in text you approved. Ask who takes responsibility if the finished inscription departs from the approved wording or layout, and what happens if the workshop accurately engraves an error in your instructions. Agree the remedy, who pays and the correction deadline. Ask your chosen provider to confirm those responsibilities in writing.
Request deposit, cancellation and refund terms for the engraving service, custody protection and responsibility for postal loss. Kodega’s published policy includes rune-engraved ring purchases in its 30-day returns scheme, but keeps the engraving charge and deducts a further £20 for engraving removal.[3] That is a ring-purchase returns policy; obtain separate terms for work on a band you already own.
Use the final written agreement to record:
- The ring: identification and condition when handed over.
- The approval: exact inscription and any visual proof, distinguishing wording approval from layout approval.
- The work: method, font, placement, resizing and finishing sequence, including acknowledgement of permanent changes.
- The price: itemised total, separately quoted extras and approval required for changes.
- The handover: collection or dispatch date, delivery arrangements and correction responsibilities.
At handover, inspect the wording, placement and finish, and request aftercare instructions for the method and finish. Manna expressly includes checking the inscription on collection; arrange an inspection opportunity with whichever service you choose.[2]
References
- Engraving Your Wedding Ring with a Personal Message (weddingrings-direct.com)
- Looking for Ring Engraving service in Birmingham? – Manna Jewellers Ltd (mannajewellers.com, 2026)
- Wedding Ring Engraving at KODEGA (kodega.co.uk)
- Wedding Ring Engraving UK: Ideas, Costs & What to Write | Weddings Hub (weddingshub.co.uk)
- Wedding ring engraving ideas: a shortlist that actually fits – Blackwell Jewellers (blackwelljewellers.co.uk)