A pallet dispenser purchase should begin with the empty pallets the machine must handle and where each pallet goes next. For a Canadian warehouse, a useful shortlist separates pallet compatibility, floor or conveyor delivery, and the responsibilities for integrating the machine into the site. A magazine capacity alone does not establish that a dispenser will work with your pallet pool.
Jantz, Wulftec and PALOMAT describe equipment for dispensing or stacking empty pallets.[1][2][3] The comparison below uses their published product information to identify questions for a quotation. It does not rank their field reliability or assume a delivered price, local service arrangement or installation approval.
Three product routes to investigate
Jantz ADVANTAGE PD 4830: defined width range
Jantz publishes a 12-pallet capacity for the ADVANTAGE PD 4830 and says it handles pallets from 30 to 48 inches wide in either orientation. It describes discharge to the floor or a conveyor and lists options including stand-alone controls, safety perimeter guarding and installation.[1]
Useful comparison: provide full pallet drawings, including construction and the surfaces the machine engages. A width range is only one dimension of compatibility. Ask which controls, guarding and installation work are included in the exact offer rather than treating listed options as standard inclusions.
Wulftec: floor or conveyor interface
Wulftec describes automatic dispensing of empty pallets to the floor or pallet conveyors. Its published specification lists up to 15 pallets of 40 by 48 inches, with other dimensions available. The page describes configurations over or beside an existing conveyor, or supplied with a conveyor.[2]
Useful comparison: establish the pallet orientation and transfer point in a layout drawing. Ask the supplier to confirm capacity for your actual pallets and to define the interface with the existing line. The published capacity for one pallet size should not be extended to every alternative size.
PALOMAT: stand-alone and integrated product families
PALOMAT describes automatic stacking and destacking of empty pallets, with stand-alone products and families for conveyor, AGV and mobile-robot integration. It identifies standard four-way wood, plastic and metal pallets among the types its equipment can handle.[3]
Useful comparison: obtain a proposal for a named model and pallet specification. Confirm the Canadian sales, installation and service arrangements in writing. Product-family compatibility does not establish that every model accepts every material, pallet geometry or automated vehicle.
Send one pallet specification to every bidder
Document the pallet types used at the intended station, their dimensions, construction, weight and permitted condition. Include variations between suppliers or return streams. Ask the equipment supplier to define the acceptable pallet envelope and how incoming pallets will be checked.
Distinguish the maximum stack the magazine can accept from the site’s actual replenishment requirement. Record peak demand, how frequently a stack can be supplied and where replenishment traffic will travel. Have the supplier explain the proposed capacity and layout against those conditions.
The scope here is empty-pallet handling. Loaded pallets, load transfer and pallet inversion are different applications and should have separate specifications.
Allocate the integration work
Request a responsibility schedule alongside the machine quotation:
- Layout: machine location, pallet presentation point, replenishment access and maintenance access.
- Interfaces: which supplier owns the conveyor or vehicle connection, controls changes and system coordination.
- Installation: unloading, positioning, utility connections and site preparation.
- Safeguarding: who assesses the complete installation and supplies the agreed protective measures.
- Handover: commissioning, documentation, operator instruction and service contacts.
Have competent personnel determine the applicable site and provincial requirements. Do not assume that a generic product claim establishes acceptance of the complete installation. Machine-level supply and responsibility for the connected system need to be clear in the contract.
Agree acceptance evidence before ordering
Ask the supplier to propose an acceptance demonstration using approved representative pallets within the permitted condition limits. Define which pallet variants and transfer interfaces it will cover, and record the configuration demonstrated. Site acceptance should address the delivered system, including the interfaces included in the contract.
Also request the supplier’s documented arrangements for rejecting unsuitable pallets and responding to interrupted operation. Review these through approved demonstrations and documentation; do not improvise damaged-pallet tests, reach into a machine or bypass protective devices. Fault recovery procedures belong in manufacturer-approved training.
Compare the installed CAD cost
Request itemised CAD quotations covering the machine, options, freight, installation, integration, commissioning and training. Identify applicable taxes, any import-related charges, buyer-supplied work and provisional allowances separately. Confirm lead times, parts support, service coverage and warranty exclusions for the site.
For a business case, use the site’s measured handling workload and the supplier’s demonstrated scope. Keep unverified labour savings and uptime assumptions separate from committed costs. Choose a proposal once pallet fit, interface ownership and acceptance conditions are documented; a larger magazine or lower machine-only price cannot answer those questions.
References
- Jantz Canada — Pallet Dispenser: ADVANTAGE PD 4830 (jantzcanada.com)
- Wulftec — Pallet Dispenser (wulftec.com)
- PALOMAT — Pallet Dispensers and Magazines (palomat.com)
